Hollow Spindle Lathe
TACCHI HD1450 CNC 752x2000
- Stock number:
- 1350-649
- Year / Condition:
- 1996
- Control unit:
- CNC (SIEMENS 840 C)
- Country of origin:
- Italy
- Freight basis:
- Ex site
- Item location:
- Hamburg
- Delivery time:
- Immediately
Picture / documents / videos
Technical specs
Details
- spindle passage:
- 520 mm
- turning diameter over bed:
- 1.550 mm
- turning diameter over slide rest:
- 1.000 mm
- Center height (originally 725 mm):
- 775 mm
- Distance between centers:
- 2.500 mm
- bed width:
- 900 mm
- workpiece length - max.:
- 2.000 mm
- Spindle speed area:
- 16- 450 U/min
- main drive motor:
- 75 kW
- Max. Workpiece weight, flying with center of gravity at 300 mm:
- 3.800 kg
- max. workpiece weight between centers:
- 9.000 kg
- longitudinal work feed of the support:
- 0-8.000 mm/min
- rapid traverse longitudinal:
- 8.000 mm/min
- Transversal feed of the support:
- 0-9.000 mm/min
- rapid traverse cross:
- 9.000 mm/min
- Travel z-axis:
- 2.000 mm
- Travel x-axis:
- 950 mm
- hollow steady rest approx.:
- 450 mm
- tailstock quill diameter:
- 150 mm
- Tailstock quill adjustment:
- 300 mm
- taper in tailstock-quill:
- MORSE 6
- Tool diameter:
- 100 mm
- workpiece length:
- 100 mm
- workpiece weight max.:
- 6 kg
- weight of the machine ca.:
- 20.000 kg
- Dimensins of the machine approx. (LxWxH) :
- 6.000 x 2.300 x 2.300 mm
- voltage:
- 380 / 50 V / Hz
Strong fixed steady rest
2 pieces Hollow spindle face plates 1.000mm diameter with 520mm passage
Tool changer
Manipulator slide runs on heard & ground guides, hydraulic drive
Description
History:
The first owner of this machine was a company from the Netherlands (Boxtel). We bought the machine together with other machines from our business partner in Hamburg. Our business partner purchased it from the original owner in 2013 for a special order. The machine was to be modified for this special order. The modifications were as follows:
- Dismantling and removal of the tool changer/manipulator
- Installation of a hollow headstock with 1,000 mm face plates on the front and rear of the headstock to fit the 520 mm spindle passage
- Adaptation of the tailstock to the hollow headstock
The hollow headstock comes from a machine from England, with which threads were reworked. The hollow headstock has hardly been used and is in very good condition.
Due to an operational reorganisation, the machine was then dismantled in 2021 and has been in storage ever since.
Condition:
All components of the machine are in very good condition for their age. The tool changer is complete and can be reactivated if required. Only the severed cables would need to be reconnected. The mechanical adaptation of the headstock has been fully completed, with the headstock being raised by 50 mm. Only the transmission ratio of the hollow headstock still needs to be adjusted in the PLC of the control unit.
Translated with DeepL.com (free version)
Contact seller
LüneHanse Vertriebs GmbH
Munstermannskamp 121335 Lüneburg Phone: +49 4131 21 97 689Fax: +49 4131 21 97 290