Details

Number of milling spindles:

4 St.

fence:

ja ja /nein

workpiece:

ja 

Control:

ja 

Description

Crosscutters Stegherr KSF 2-4

The modern, practical machine concept
for efficient cross-hatch production.

Many years of know-how and a mature, proven 1000-times
Machine guarantee you precision to an optimal
Price-performance ratio.
Special emphasis is placed on easy operation and flexibility
placed the machine.

Extension KSF 2/4
Milling units A1, A2, A3 as with KSF 2.
Milling unit A4, machining of the counterpart without turning,
View side absolutely tear-free.

With electronic positioning control.
Length of the stop: 4200 mm
The cutouts are made by an upper and lower, the Ausplattung by
a third milling unit in a single operation.
The feed rate of the cutter group is infinitely adjustable. The
entire group of milling cutters moves into the tensioned, stationary workpiece.

The upper and lower tool set can be individually adjusted in height.
Thus, the conversion of the machine to a different wood thickness is very
fast. The tools are driven by two three-phase motors each with 1.1
kW.

The distances of the desired cutouts and their number are in the
Positioning control entered and stored. Likewise, the total number of
typed in to be machined workpieces. Programming the
Positioning control is possible without special knowledge.

Voltage: 400V / 3Ph / 50Hz

Drive 3 x 1.1 KW
Compressed air p = 6 bar

4.Fräsaggregat

This additional groove aggregate makes it possible to vertical and horizontal
To work on sprouts without turning them 180 °. This is
ensures that the visible side can be milled without breakage.

Machine can be controlled online.

Length recognition of the inserted workpieces in the machine with optimized
Processing.

Control with Windows 98

(technical data according to manufacturer - without guarantee!)