Description

- NEW -

completely in standard version with:
- Fully automatic electronic control with pulse operation via foot valve
Tension-drilling-relaxation, electrical intermittent operation.
- Automatic return of the drilling unit after reaching the set one
Drilling depth
- Automatic drill hole depth extension when drilling from the front
This saves having to change the depth of the borehole from flat to
End holes (+ 10 mm e.g. with dowel length 35 mm, drilling depth
Flat side 14 mm and drilling depth front side 24 mm)
- 1 drilling beam with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed
0-70 mm).
Incl. 21 quick-change chucks (System Ganner) for easy
Change the drill
- Easy swiveling of the drilling unit from 0 ° to 90 °, supported by
Gas cylinder
- 1 tensioner carrier displaceable in the Y-axis with 3 pneumatic
Clamping cylinder, for workpiece height up to max. 80 mm
- Ideal stop system consisting of:
- 1 stop ruler 1800 mm for drilling shelves,
(Aluminum profile 40x40 mm) with 3 insertion stops,
with quick-change system, easy to change from right to left
Stop side for mirror-image drilling
of intermediate floors in carcass constructions, can also be used for
Row of holes in system 32
- Side stops and position settings, as well as the position of the
Drilling height above the support table using mechanical digital counters
- Side stops can easily be swung out for the shortest
Conversion from body to frame and hole row holes
- Tensioning arms for tensioner carriers designed for hole row positions up to max.
300 mm.
- Ideal three-stage tool system

Technical specifications:
Drilling head 21 spindles, pitch 32 mm
Working width 640 mm
Portal passage approx. 750 mm
Drilling feed 0-70 mm
Position adjustment drilling unit 0-40 mm
Position adjustment hole row 0-300 mm
Spindle speed 2800 rpm.
Shank diameter of the drill 10 mm
Clamping height of workpieces max. 80 mm
Motor 1.5 kW, 400 V, 50 Hz
Working height 900 mm
Compressed air connection 6 bar
Weight about 400 kg


- NEW -

completely in standard version with:
- Fully automatic electronic control with pulse operation via foot valve
Tension-drilling-relaxation, electrical intermittent operation.
- Automatic return of the drilling unit after reaching the set one
Drilling depth
- Automatic drill hole depth extension when drilling from the front
This saves having to change the depth of the borehole from flat to
End holes (+ 10 mm e.g. with dowel length 35 mm, drilling depth
Flat side 14 mm and drilling depth front side 24 mm)
- 1 drilling beam with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed
0-70 mm).
Incl. 21 quick-change chucks (System Ganner) for easy
Change the drill
- Easy swiveling of the drilling unit from 0 ° to 90 °, supported by
Gas cylinder
- 1 tensioner carrier displaceable in the Y-axis with 3 pneumatic
Clamping cylinder, for workpiece height up to max. 80 mm
- Ideal stop system consisting of:
- 1 stop ruler 1800 mm for drilling shelves,
(Aluminum profile 40x40 mm) with 3 insertion stops,
with quick-change system, easy to change from right to left
Stop side for mirror-image drilling
of intermediate floors in carcass constructions, can also be used for
Row of holes in system 32
- Side stops and position settings, as well as the position of the
Drilling height above the support table using mechanical digital counters
- Side stops can easily be swung out for the shortest
Conversion from body to frame and hole row holes
- Tensioning arms for tensioner carriers designed for hole row positions up to max.
300 mm.
- Ideal three-stage tool system

Technical specifications:
Drilling head 21 spindles, pitch 32 mm
Working width 640 mm
Portal passage approx. 750 mm
Drilling feed 0-70 mm
Position adjustment drilling unit 0-40 mm
Position adjustment hole row 0-300 mm
Spindle speed 2800 rpm.
Shank diameter of the drill 10 mm
Clamping height of workpieces max. 80 mm
Motor 1.5 kW, 400 V, 50 Hz
Working height 900 mm
Compressed air connection 6 bar
Weight about 400 kg