Details

Tenoning spindle:

1 St.

Number of milling agregates:

6 St.

Spindle diameter:

50 mm

Control:

PC-Nexus 

Description

Weinig Unicontrol 10 - Spindles radially and axially CNC controlled

with the following processing units:

Cut saw
----------------
with laser direct light, motor strength 3 KW, spindle diameter 40 mm,
Spindle speed 2,800 rpm, tool flying circle 400 mm,
Adjustment axially via NC axis
Adjustment radial pneumatic to 8 positions

Aggregate from below for edge rounding
----------------
Spindle with motor power 1 KW, spindle diameter 20 mm
Spindle speed 9,000 rpm
Tool flight circle 120 mm
Tool clamping length 13 mm
Adjustment axially with crosscut saw
Adjustment radially pneumatic to 2 positions
Additional axial position for edge rounding down

Tap and slot spindle
----------------
Engine power 15 KW
Spindle diameter 50 mm
Spindle speed 2,925 rpm
Tool circle 400 mm
Tool clamping length 640 mm
Adjustment axial CNC - axis
Adjustment axial 580 mm
Adjustment speed 100 mm / sec.
4 - fold counter mounted on the slot table

1. Profile spindle
----------------
Engine power 11 KW
Spindle diameter 50 mm
Spindle speed 6,000 rpm
Tool span length 400 mm with counter bearing
Adjustment axial and radial via CNC axis

2. Profile spindle
----------------
Engine power 11 KW
Spindle diameter 50 mm
Spindle speed 6,000 rpm
Tool span length 400 mm with counter bearing
Adjustment axial and radial via CNC axis

Profilfräsaggregat horizontal above
----------------
Engine power 3 KW
Spindle diameter 40 mm
Spindle speed 5,850 rpm
Tool flying circle 130 mm
Adjustment pneumatically to 8 positions axially and radially

3. Profile spindle
----------------
Engine power 11 KW
Spindle diameter 50 mm
Spindle speed 6,000 rpm
Tool span length 400 mm with counter bearing
Adjustment axial and radial via CNC axis

Profilfräsaggregat vertical right at the end of the machine
----------------
Engine power 3 KW
Spindle diameter 40 mm
Spindle speed 5,850 rpm
Adjustment pneumatically to 8 positions axially and radially

Profilfräsaggregat horizontal bottom in additional stand
----------------
Engine power 3 KW
Spindle diameter 40 mm,
Spindle speed 5,850 rpm
Adjustment pneumatically to 8 positions axially and radially

Length stop CNC - controlled, mounted on the slot table
for lengths up to 3500 mm, swiveling +/- 60 ° with display in the PC

Double parts package with automatic separation and transfer

Studio window device, swiveling 60 ° on both sides

Feed rollers axially clocked in the area of ??the 3rd longitudinal profiling
spindle
for narrow and short parts

Electronic feed - height adjustment

Sprout guide consisting of automatically clocked guide rail
and sprout support bar

Renewal package, including mills of wing widths less than 500 mm

Table top clocked to tool diameter, 2 positions

Air conditioner in the control cabinet

Central lubrication manually

PC control NEXUS

Automatic turning system
Slat conveyor, including conveyor belt for
Return of the workpieces to the operator

Extraction nozzle - diameter:

Cross-cut saw 80 mm
Rounding device 80 mm
Slit spindle 140 mm
3 profile spindles each 140 mm
Fitting spindle 120 mm
Profile spindle horizontal 80 mm
Profile spindle below 80 mm

Technical information according to the manufacturer - without guarantee!