Description

Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/bottom wiper, especially designed for processing of high viscous pastes and sealing compounds, consist of 1 high speed (speed 200-2,500 rpm) and 1 low speed stirrer (speed 20-200 rpm), speed planetary plate 7-84 rpm, mixing tools 2x cross beam and 2x Butterfly, possible combinations both sides cross beam, cross beam and Butterfly, both sides Butterfly, highspeed mixing shaft with rotation direction reversal, 2 container each total volume appr. 18 l, gross volume 5-15 l (according to product), container dia 270 mm, depth 316 mm, entire height 335 mm, heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water, hydraulic container lifting/lowering device, press out device, product parts made of s/s 1.4401 (AISI 316 L), grinded grain 320 and electropolished, sealings VITON, PTFE compound FDA certified, material colomn 1.4571 (AISI 316 Ti), 3 spraying heads, product temperature monitoring device with sensor PT 100 with disconnect of mixing shafts at adjustable target temperature, 4-channel data recorder, vacuum pump, hydraulic pump, software for recording measured data, PLC Siemens S7-300, interfaces RJ45, Ethernet, Cross-over, display Stahl MT-65, electr. connection 230/400V/50Hz/9kW, no explosion protection, no wiring electric cabinet-machine, mixer is fixed on a s/s-plate, in 2017 complete new sealings and parted colomn in material 1.4571 (AISI 316 Ti) at manufacturers shop, since then without use