Details
- line wire Ø from spool max
- 6 mm
- line wire Ø pre-cut max
- mm
- strokes (cross wire/min) max
- 2 x 90
- line wire Ø from spool min
- 3,5 mm
- cross wire Ø from spool max
- 6,0 mm
- cross wire Ø from spool min
- 3,5 mm
- mesh width max
- 2500 mm
- no. of line wires max
- 16 ( equiped with elements for 12 line wires )
- up to now used for
- ribbed constructional steel wire
- type of drive
-
- motor power
- kW
- revolutions
- min-1
- total connected load
- kW
- operation voltage
- 380 V
- frequency
- 50 Hz
- control voltage
- 220 V
- suitable for
-
- line wire Ø pre-cut min
- mm
- cross wire Ø pre-cut min
- mm
- cross wire Ø pre-cut max
- mm
- line wire feeding
- from spool
- cross wire feeding
- from spool
- line wire distance min
- 100 mm
- line wire distance max
- mm
- line wire spacing
- mm
- cross wire distance min
- 50 mm
- cross wire distance max
- mm
- cross wire distance
- programable in 1 mm steps up to 999 mm
- no. of welding transformers
- 12
- transformer capacity (50% duty ratio)
- 100 kVA
- no. of welding presses
- 2 x 6
- no. of bottom electrode holders
- 2 x 12
- mesh width min
- 2000 mm
- welding width max
- 2400 mm
- mesh length min
- 2000 mm
- mesh length max
- 6000 mm
- examples of production
-
- production capacity
- t/a
- no. of line wire pay-offs
- 48
- no. of cross wire pay-offs
- 4
- line wire haul-off (loop)
- ZG 24 LAR 5
- line wire feeding system
- ZG 24 LVR 6.2
- line wire straightening device
- yes
- cross wire feeding system
- ZG QHA 1 (new in year 2007)
- Meshwelding machine
- MG 24.8 / 12 C
- mesh shear
- ZG 24 SL 4.2
- mesh turner and stacker
- Mattenstapler
- mesh roller
-
- cross wire feeder
-
- weld current control
- SWEP 04/ST 530
- function control
-
- machine length
- mm
- machine width
- mm
- machine height
- mm
- machine weight
- kg
- Control unit
- conventional
Sold