Details

max. wheel diameter:

215 mm

gear width:

40.65 mm

Largest Speed Ratio:

1:10 

x-axis:

(horizontal) -152 to 102 mm

y-axis:

(vertical) -102 to 178 mm

z-axis:

Sliding Base Travel 2" to 12" (51 to 304mm)  mm

b-axis:

3 - 90  °

max. distance machine center to spindle slide:

115 mm

max. nos. of teeth:

5 - 200 ( inclusive ) St.

workpiece external diameter max.:

215 mm

tooth profile - width x height:

16 x 40,65 mm

grinding wheel diameter:

51 -190 mm

grinding wheel turining speeds:

1000 - 6000 1/min

workpiece turning speeds:

0 - 30 1/min

workpiece spindle bore:

konisch 3-29/32 "

speed of axis:

125 mm/sec.

total power requirement:

20 kW - 380 V - 50Hz kw

weight of the machine ca.:

10000 kos.

dimensions of the machine ca.:

4750 x 3400 x 2540 mm

Description

Model 200HG GLEASON Phoenix CNC Hypoid Spiral Bevel Gear Grinding Machine, Serial No. 914904, New 1996.
Suitable for the hard finishing of spiral bevel, zerol bevel,and hypoid gears and pinions up to 8" (215.90mm) pitch diameter at 5:1 ratio, 1.6" (40.65mm) maximum face-width,
utilizing non-dressable plated CBN wheels, or dressable wheels such as conventional aluminum oxide, SG, and/or vitrified CBN type .

- Mhine furnished with free standing, air conditioned electrical enclosure, w/operator's controls located at machine front, adjacent to access door
- GE-FANUC Series 150 Momputer Control , 10.4" LCD flat color display, storage capacity for 100 summaries, cycle fault monitoring, and automatic setup and control of 7 axes:
(A ) Work Spindle, (B) Swinging Base, (C) Wheel Spindle, (D) Dresser, (X) Horizontal, (Y) Vertical, (Z) Sliding Base
- Machine arrangement as 200HG Grinder
- Manual stock dividing system
- Wheel dressing unit (dressing cycle via cnc)
- Totally enclosed work-area guarding w/powered
access door
- Work chamber lighting
- Hydraulic work piece chucking with draw-rod
- Flooded suction-type hydraulic unit
Axes Speeds
X-Horizontal 4.92"/Sec. (125mm/Sec.)
Y-Vertical 4.92"/Sec. (125mm/Sec.)
Z-Sliding Base 4.92"/Sec. (125mm/Sec.)
A-Workspindle RPM...................... 0 to 30
B-Sliding Base......................... 0 to 30 deg./sec.
C-Wheel Spindle........................ 1000 to 6000 RPM
D-Dresser Spindle...................... 1500 to 8000 RPM
Root Angle Range (B-Axis).............. -5 deg. To 90 deg.
Equivalent Root Angle Range............ -8 deg. To 90 deg.
(Equivalent refers to cradle type machine)
Full Depth (Maximum)................... .0.615" (16.00mm)
Face Width (Maximum)................... .1.600" (40.65mm)
Range of Tooth Numbers................. 5 to 200 inclusive
Maximum Gear Pitch Diameter of Typical
35° Spiral Angle Gear Using Maximum
Wheel Diameter......................... 7.5" Diameter Wheel
At the Following Ratios:
1:1.................................... 6.75" (171.45mm)
2:1.................................... 8.50" (215.90mm)
5:1.................................... 8.50" (215.90mm)